NBI Management: Cost and schedule preparation continues. The biweekly CD1
job status is complete. Photos for the upgrade website have been gathered for
use. Discussions with ERWM and HP took place to insure compliance with
processing rad waste from the decon effort.
NBI Decon: The Lid Stand was moved from the RESA shop into the Test
Cell and positioned on the Test Cell floor. Decon of the calorimeter continues.
Surveys continue to show reduction of contamination levels across the board.
Preparations to remove the BL4 TIV and exit spool piece are underway.
Preparations to remove the magnet and 90 inch flange are also underway.
NBI Relocation: Evaluation of lift fixture concepts and details continues
to optimize clearance height and ease of attachment.
NBI Power and Control: Focus continues on cabling and connections
within the NTC. The controls cost estimate development continues.
NBI Duct, VV Port: The rearrangement of the TVPS portion of the duct
has been simplified and remodeled to maintain aisleways.
NBI Armor: Research of material specifications for tile thermal analysis
continues.
NBI BL Services: Cost data is being collected and tallied for the estimate
later this month.
NTC Equipment Relocations: The relocation scope has been refined with
additional diagnostics data. The cost estimating process is underway and nearing
completion.
Regards,
Tim
Timothy N. Stevenson
Head
of Experimental Heating Systems & Neutral Beam Operations
LSB
316 C Site
Princeton Plasma Physics Laboratory
Princeton University
P.O.
Box 451
Princeton, NJ 08543
Office (609)
243-2657
FAX (609) 243-3248
Skypager # : 2047351
You can visit the home page of the DOE Princeton Plasma Physics
Laboratory